Mturk Jobs

Mturk Jobs
Mturk Jobs

Tank

Saturday, May 21, 2011

Gyro Horizon. Renesas RX62N Kit


In this post, we 'll show an advanced kit from Renesas based on a modern microcontroller RX62N.

I received this kit by participation in Renesas Design Contest 2010. The kit has various types of sensors and interfaces to the outer world that cannot be makes you wonder how to use them all in one application. For example, it contains a 3D accelerometer and a temperature sensor, USB , CAN , Ethernet and RS-232 interfaces and an alphanumeric LCD.



The contest allows each contestant participate using only one application.

I wondered what application should I design , and I decided to design an ADI after being inspired by the Embraer 170 ADI ( Attitude Direction Indication )



This is the ADI


The ADI is an important aviation instrument that helps the pilot controlling and the aircraft. It senses and indicates Pitch ( Up and Down ) and Roll ( Right and Left ) attitude of the aircraft.




The actual ADI instrument senses the attitude using sensors in the aircraft called Gyroscope. The modern types of ADI collects attitude data from an electronic device called Laser Gyro or Fiber Optic Gyro.

My version of ADI uses a built in sensor in the Renesas kit called Accelerometer.


This is the running application on the kit ( ADI appears on the LCD )


The
Accelerometer is an electronic MEMS sensor that senses acceleration in three dimensions.

The Accelerometer senses the acceleration in three dimensions and then the RX62N microcontroller reads the data and then draws the output indication on the LCD on the kit.




This is the kit and the application on the LCD



This is the video of the kit in action.




Here is the contest entry :

http://renesasrulz.com/design_contest_archives/the_rx_mcu_design_contest/contest_entries/m/mediagallery/260.aspx


Here is the project on instructables


http://www.instructables.com/id/Gyro-Horizon-DIY/





رابط المقالة على مدونتى باللغة العربية
This is the link to the post in Arabic





If you like this blog you can support us by many ways:
   
   1. Leave comments stating your point of view about this article.

   2. Buy our book on Amazon Learn By Making.

   3. Click on links of our sponsors without adding any extra cost on you if you make purchase from them. Actually, many of these offers are totally free.
  4. Visit our new website outatime.tech.

Thank you for visiting our blog.

Tank